Product System
Contact Us
Contact E-mail
Contact Address
Axis Type Five Machine Interconnection
Machining of parts over 2 minutes / 3 minutes One robot controls 2 production lines Directly fixed on the floor, easy to install and move handling Small footprint and low venue costs
Classification:
Automated Production Line for Shafts
Key words:
Product Description
● Axis Type Five Machine Interconnection
Axis Type Five Machine Interconnection，ately processing 2 minutes / 3 minutes or more parts, the advantage is that one of the machines in the process of tool change, the robot can skip the tool change equipment, through the storage bin automatically into the next machine tool for loading and unloading work, the staff does not produce a safety hazard, to achieve the separation of man-machine operation to ensure that the robot and the human will not collide with the characteristics of the robot.
Equivalent to one robot controlling 2 production lines |  Intelligent Inspection Console (optional) |
● Video of customer's factory processing
● Comparison chart of the advantages of dual vertical and inclined car automation
 |  |
☺ Machining of 1 meter motor shafts，The footprint of a vertical lathe setup is 7.5 x 9.6 m. | ☹ Machining of 1 meter motor shafts，The footprint of a line setup with an inclined lathe is 5 x 43 m，There is a lot of waste of workshop space. |
● Manual operation instructions: horizontal CNC lathe and double spindle vertical lathe advantages comparison chart
● Schematic diagram of two connected ordinary lathes
Three major drawbacks of automated inline:
1. Conventional standard machine tools have poor rigidity, low cutting volume and slow machining efficiency.
2. Difficulty and high cost of automation linkage, unstable automation of truss structure due to deformation of ground falling, high failure rate.
3. Occupying too large an area,
● Schematic diagram of four connected ordinary lathes
Two major disadvantages of manual operation:
1. Conventional standard machine tools have poor rigidity, low cutting volume and slow processing efficiency.
2. Manual operation due to the alignment is too long, high site costs, back and forth 8.8 meters, physical strain, can only manage two machines, labor costs increased by 50%.
● Schematic diagram of five automation machines for double-axis vertical lathe
The three main points of the automated linkage:
1. More than 30% increase in rigidity than conventional standard machine tools, single cutter cutting capacity of more than 12mm, high machining efficiency.
2. Automation linkage is directly fixed on the machine tool or joint robot can be directly fixed on the ground, easy to install and carry mobile.
3. Small footprint, low site costs, the total length of the production line to reduce more than 50% of the manual operation of short walking distance back and forth, easy to manage.
● Schematic diagram of four automation machines for double-axis vertical lathe
Two major advantages of manual operation:
1. More than 30% increase in rigidity than conventional standard machine tools, single knife cutting capacity of more than 12mm, high processing efficiency, is 125% of the output of similar machines.
2. Short distance for manual operation, low site costs, relative to the usual horizontal machine tool two distance is also short, low manual labor intensity, the management of multiple machine tools appear to be easy. Such as: 1 minute or so when processing parts, a person can manage 2 (equal to 4) labor costs reduced by more than 50%.
Product Video
Customized Services
Automation
Function of loading and unloading
Control System
numerical control system
Fixture selection
Appearance design
Parameter customization
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Product Series
Contact Us
WhatsApp:
Contact E-mail:
Contact Address:
